M-108 BASIC WORKSHOP PRACTICE LAB

Topic outline

• 

  General

  • LIST OF EXPERIMENTS Forum
• 

  Topic 1

  • BASIC WORKSHOP PRACTICE LAB (FITTING) (1.1 Perform Making and Filing Operations on Mild Steel Flat of 12 mm Thickness)

    
    

  • BASIC WORKSHOP PRACTICE LAB (FITTING) (1.2 Perform Sawing and Chipping Operations on Mild Steel Flat of 6 mm Thickness)

    
    

  • BASIC WORKSHOP PRACTICE LAB (FITTING) (1.3 Perform Drilling and Chamfering Operations on Mild Steel Flat of 12 mm Thickness)

    
    

  • BASIC WORKSHOP PRACTICE LAB (FITTING) (1.4 Perform Tapping Operation on Mild Steel Flat of 12 mm Thickness & Dieing Operation on Mild Steel Rod of 12 mm Diameter)

    
    

  • BASIC WORKSHOP PRACTICE LAB (FITTING) (1.5 Assembling of Two Mild Steel Flats of 6 mm Thickness and Matching by Filing Operation)

    
    

  • BASIC WORKSHOP PRACTICE LAB (FORGING) (2.1 Conversion of Mild Steel Round Rod to Square Rod)

    
    

  • BASIC WORKSHOP PRACTICE LAB (FORGING) (2.3 Preparation of Chisel from Mild Steel Rod)

    
    

  • BASIC WORKSHOP PRACTICE LAB (FORGING) (2.4 Preparation of Ring and Hook from Mild Steel Rod)

    
    

  • BASIC WORKSHOP PRACTICE LAB (CARPENTRY) (3.1 Cutting of Wood with Hand Saw)

    
    

  • BASIC WORKSHOP PRACTICE LAB (CARPENTRY) (3.2 Planning and Chiselling of Wood)

    
    

  • BASIC WORKSHOP PRACTICE LAB (CARPENTRY) (3.3 Preparation of Half Lap T – Joint)

    
    

  • BASIC WORKSHOP PRACTICE LAB (CARPENTRY) (3.4 Preparation of Dovetail Lap Joint)

    
    

  • BASIC WORKSHOP PRACTICE LAB (CARPENTRY) (3.5 Preparation of Mortise and Tenon Joint)

    
    

  • BASIC WORKSHOP PRACTICE LAB (CARPENTRY) (3.6 Preparation of Rolling Pin on Wood Turning Lathe)

    
    

  • BASIC WORKSHOP PRACTICE LAB (CARPENTRY) (3.7 Preparation of House Hold Article – Wooden Stool)

    
    

  • BASIC WORKSHOP PRACTICE LAB (SHEETMETAL) (4.1 Practice on Cutting of Sheet)

    
    

  • BASIC WORKSHOP PRACTICE LAB (SHEETMETAL) (4.2 Formation of Joints like Grooved Joints, Locked Groove Joint)

    
    

  • BASIC WORKSHOP PRACTICE LAB (SHEETMETAL) (4.3 Preparation of a Rectangular Open Type Tray)

    
    

  • BASIC WORKSHOP PRACTICE LAB (SHEETMETAL) (4.4 Preparation of Hollow Cylinder)

    
    

  • BASIC WORKSHOP PRACTICE LAB (SHEETMETAL) (4.5 Preparation of Pipe Elbow)

    
    

  • BASIC WORKSHOP PRACTICE LAB (SHEETMETAL) (4.6 Preparation of Mug)

    
    

  • BASIC WORKSHOP PRACTICE LAB (SHEETMETAL) (4.7 Preparation of Funnel)

    
    

  • BASIC WORKSHOP PRACTICE LAB (SHEETMETAL) (4.8 Preparation of Utility Article – Dust Pan)

    
    

  • PLUMBING (5.1 Preparation of Pipe Joint with Pipe Fittings)

    
    

  • PLUMBING (5.2 Thread Cutting on Galvanised Iron Pipe)